Test Leads, Probes, and Clips

Designed for repeated insertion and extraction the MicroTec range of test leads are available with a variety of connectors to suit almost any test and measurement need.


Multimeter Probes

Pico Technology

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.


Small crocodile (gator) clips

Pico Technology

The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.

Large Dolphin (Gator) clips

Pico Technology

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Piercing clips

Pico Technology

The insulation piercing test clips allow the user to provide the exact pressure needed to pierce the insulation of a wide range of wire types and sizes. The clips also feature a rotating banana jack that prevents the test lead from twisting and allows the test equipment to be kept in the circuit while the wire is pierced, providing immediate confirmation that contact with the conductor has been made.

BNC plug to 4mm adapter

Pico Technology

BNC plug to 4mm adapter

BNC plug to 4mm plugs (1.2m)

Pico Technology

Test lead - BNC plug to 4mm plugs (1.2m)

BNC plug to crocodile clips (1.2m)

Pico Technology

Test lead - BNC plug to crocodile clips (1.2m)

BNC plug to BNC plug (1.8m)

Pico Technology

Test lead - BNC plug to BNC plug (1.8m)

Automotive Test Lead

Pico Technology

The TA000 test lead has been custom made for automotive use with the ADC-212. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to reduce noise pickup.

USB Type-C to Standard-A (f) adaptor, 0.14 m

Pico Technology

USB Type-C is a new cable and connector standard that allows smaller USB devices and faster data transfers. It also simplifies the connection process with just the one type of reversible connector on both ends of a reversible cable.

The TA285 is a high-quality USB Type-C SuperSpeed to USB Standard-A (f) adaptor for use with any USB-connected PicoScope oscilloscope, or PicoLog data logger, and a Type-C port on a laptop or PC. Overall length of the adaptor is 139 mm.

20–Way Digital Cable for PicoScope 2205 MSO

Pico Technology

This cable makes it easy for you to connect the digital channels of your PicoScope 2205 MSO to the signals you want to analyze.

  • Digital inputs: 16
  • Ground connections: 4
  • Length: 25 cm  (approximately 9.8 in)

Test Clips for PicoScope 2205 MSO

Pico Technology

A pack of ten test clips for use with the TA136 digital cable.