TiePie Handyprobe HP2 (20MHz Version)

Udgået produkt
  • Beskrivelse
  • Mere information
  • 1 channel
  • 8 bit
  • 20 MHz
  • LPT

Handyprobe HP2 produceres og sælges ikke længere
Se PicoScope 2104 for erstatning

Hand Held Oscilloscope Multi-Instrument 20 MHz

The Handyprobe HP2-20 is connected to the parallel printer port of the computer. The eight bit resolution, maximum sampling speed of 20 MHz, maximum recordlength of 64K samples and input range of 0.5 volt full scale to 400 volt full scale enables you to use the Handyprobe HP2 for all your measuring tasks.

The versatile software that is delivered with the Handyprobe HP2 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.

Measured signals can be saved to disk, for later examination or reference. The extensive documentation features and the (color) hardcopy function are ideal for reporting.

The Handyprobe HP2 is delivered with Windows and DOS software and user manuals.

Documents available for download:
 Handyprobe HP2 - Leaflet (0.35 MB)

Inputs 1 analog
A/D converter
   effective data throughput
   conversion time
8 bit = 0.039%
1,000,000 - 20,000,000 samples/sec
50 nsec
Analog input
   maximum voltage
0.5V .. 400V full scale
500 V
1 MOhm / 30 pF
1% ± 1 LSB
DC to 2 MHz
Trigger system
   level adjustment
   hysteresis adjustment
   pre trigger
   post trigger
digital, 2 levels
channel, keyboard
rising slope, falling slope, inside window, outside window
0 - 100% of full scale
0 - 100% of full scale
0.039% (8 bits)
0 - 32768 samples (0 - 100%)
0 - 32768 samples (0 - 100%)

Maximum sample rate 

accordings model - 1 MHz, 2 MHz, 5 MHz, 10 MHz or 20 MHz
Memory 64 KWords
I/O address LPT1, LPT2 or LPT3
Power from LPT
Sizes 22 mm x 125 mm x 43 mm