TiePie Handyscope-HS3 (100MHz version)

TiePie engineering
HS3-AWG-100
  • Beskrivelse
  • Mere information
  • 2 Channels
  • 12 bit
  • 100 MHz
  • USB 2.0
  • Arbitrary Waveform Generator

Handyscope-HS3 100MHz USB Multi-Instrument (DSO, AWG, Spectrum Analyzer, Voltmeter, Transient Recorder).

The Handyscope-HS3 is a powerful computer controlled measuring instrument that consists of four measuring instruments: a Voltmeter, OscilloscopeSpectrum analyzer and Transient recorder. Also an AWG (Arbitrary Waveform Generator) is available. This new powerful and compact measuring instrument can solve almost every measurement problem.

The Handyscope-HS3 features a user selectable 12 bit, 14 bit or 16 bit resolution (14 bit effective, SNR 95 dB), 200 mV - 80 V full scale input range, 128 Ksamples record length per channel and a sampling frequency up to 100 MHz on both channels.

The integrated AWG operates fully independent from the measuring system of the Handyscope-HS3. It has a 100 MHz sampling clock, 1024 / 128K samples deep waveform memory, 14 bit output resolution and ± 12 Volt output range. The AWG allows you to generate test signals for your measurements in any shape you like. Several standard signal shapes are available and it is possible to regenerate previous measured signals.

Connected to the fast USB 2.0, the Handyscope-HS3 doesn't require an external power supply, therefore the Handyscope 2 easily complies to "Plug in and measure".

The universal software that is delivered with the Handyscope-HS3 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.

The Handyscope-HS3 is delivered with 2 1:1 - 1:10 switchable oscilloscope probes, Windows software and user manuals.

Documents available for download:
 Handyscope HS3 - Leaflet
 Handyscope HS3 - Instrument description
 Handyscope HS3 - Application Note

Specification
Inputs Inputs 2 analog
Outputs 1 analog
A/D converter
   resolution
   effective data throughput
   conversion time
1 per channel
12 bits = 0.025%, in mode 100 MHz only 8 bits = 0.39%
100,000,000 samples/sec
10 nsec
Analog input
   sensitivity
   maximum voltage
   impedance
   coupling
   accuracy
   bandwidth
BNC
200 mV .. 80V full scale
±200 V (DC + AC peak, < 10 kHz)
1 MOhm / 30 pF
AC/DC
0.2% ± 1 LSB
DC to 50 MHz
Analog output
   sample rate
   resolution
   record length
   bandwidth
   impedance
   coupling
   output amplitude
   amplitude step
  
  
   DC level
   Waveforms
   Symmetry
BNC
0 - 50 MHz
14 bit
1024 / 131060 points
DC to 2 MHz
50 Ohm
DC
-12V to +12V
0 .. 0.1V / 8192 steps
0 .. 0.9V / 8192 steps
0.9 .. 12V / 8192 steps
0 .. 12V / 8192 steps
sine, triangle, square, DC, noise and user defined
1 .. 99%, 1% steps
Trigger system
   sources
   modes
   level adjustment
   hysteresis adjustment
   resolution
   pre trigger
   post trigger
digital, 2 levels
Ch1, Ch2, Ch1&Ch2, Ch1/Ch2, digital extern
edge, window
0 - 100% of full scale
0 - 100% of full scale
0.025% (12 bits)
0 - 131060 samples (0 - 100%)
0 - 131060 samples (0 - 100%)

Maximum sample rate
 
 
 

  8 bit: 100 MHz
12 bit: accordings model - 50 MHz, 25 MHz, 10 MHz or 5 MHz
14 bit: 3 MHz
16 bit: 200 kHz
Memory 128 KWords / channel
Interface USB 2.0 and USB 1.1
Power from USB, from PS/2 mouse port, or from external power adapter, 500 mA @ 5 V
Sizes 25 mm x 170 mm x 140 mm
Accessory
 
2 oscilloscope probes 1:1 - 1:10 switchable
external power cable for PS/2 mouse or keyboard connector