The Handyscope-HS3 features a user selectable 12 bit, 14 bit or 16 bit resolution (14 bit effective, SNR 95 dB), 200 mV - 80 V full scale input range, 128 Ksamples record length per channel and a sampling frequency up to 100 MHz on both channels.
The integrated AWG operates fully independent from the measuring system of the Handyscope-HS3. It has a 100 MHz sampling clock, 1024 / 128K samples deep waveform memory, 14 bit output resolution and ± 12 Volt output range. The AWG allows you to generate test signals for your measurements in any shape you like. Several standard signal shapes are available and it is possible to regenerate previous measured signals.
Connected to the fast USB 2.0, the Handyscope-HS3 doesn't require an external power supply, therefore the Handyscope 2 easily complies to "Plug in and measure".
The universal software that is delivered with the Handyscope-HS3 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.
The Handyscope-HS3 is delivered with 2 1:1 - 1:10 switchable oscilloscope probes, Windows software and user manuals.
Documents available for download:
Handyscope HS3 - Leaflet
Handyscope HS3 - Instrument description
Handyscope HS3 - Application Note
Specification |
Inputs |
Inputs 2 analog |
Outputs |
1 analog |
A/D converter resolution effective data throughput conversion time |
1 per channel 12 bits = 0.025%, in mode 100 MHz only 8 bits = 0.39% 100,000,000 samples/sec 10 nsec |
Analog input sensitivity maximum voltage impedance coupling accuracy bandwidth |
BNC 200 mV .. 80V full scale ±200 V (DC + AC peak, < 10 kHz) 1 MOhm / 30 pF AC/DC 0.2% ± 1 LSB DC to 50 MHz |
Analog output sample rate resolution record length bandwidth impedance coupling output amplitude amplitude step DC level Waveforms Symmetry |
BNC 0 - 50 MHz 14 bit 1024 / 131060 points DC to 2 MHz 50 Ohm DC -12V to +12V 0 .. 0.1V / 8192 steps 0 .. 0.9V / 8192 steps 0.9 .. 12V / 8192 steps 0 .. 12V / 8192 steps sine, triangle, square, DC, noise and user defined 1 .. 99%, 1% steps |
Trigger system sources modes level adjustment hysteresis adjustment resolution pre trigger post trigger |
digital, 2 levels Ch1, Ch2, Ch1&Ch2, Ch1/Ch2, digital extern edge, window 0 - 100% of full scale 0 - 100% of full scale 0.025% (12 bits) 0 - 131060 samples (0 - 100%) 0 - 131060 samples (0 - 100%) |
Maximum sample rate |
8 bit: 100 MHz 12 bit: accordings model - 50 MHz, 25 MHz, 10 MHz or 5 MHz 14 bit: 3 MHz 16 bit: 200 kHz |
Memory |
128 KWords / channel |
Interface |
USB 2.0 and USB 1.1 |
Power |
from USB, from PS/2 mouse port, or from external power adapter, 500 mA @ 5 V |
Sizes |
25 mm x 170 mm x 140 mm |
Accessory |
2 oscilloscope probes 1:1 - 1:10 switchable external power cable for PS/2 mouse or keyboard connector |