ADC-200/20 PC-oscilloskop

PP058
Udgået produkt
  • Beskrivelse
  • Mere information
  • High Speed and Performance
  • 20MS/s Dual Channel Digital Storage Scope
  • A fraction of the cost of comparable benchtop scopes
  • Deep 8 KB buffer memory
  • Supplied complete with PicoScope software
  • Simply plugs into any desktop or laptop PC

ADC-200/20 produceres og sælges ikke længere
Se 
PicoScope 3204 for erstatning

High Speed and Performance PC Oscilloscope & Spectrum Analyzer

The ADC-200 PC based oscilloscopes offer performances only previously available on expensive ‘desktop’ scopes. As a general purpose lab scope, the large memory and advanced trigger functions make it ideal for designers of microcontroller and other digital circuits, whilst the spectrum analyser is an essential tool for tracking down noise in power supplies and amplifiers. For field engineers servicing and repairing equipment, a library of waveforms showing the correct signals at each test point (and typical problems) can save valuable time.

Advanced trigger modes help track down intermittent faults. For example, to find a fault with a fire / burglar alarm, the ADC-200 can be left running overnight with its ‘save to disk on trigger’ option enabled: when the fault occurs, a trace will be saved to disk complete with a time/date stamp. To locate errors in digital signals, the display overwrite option can be used to highlight erroneous events even if they only occur once. The ADC-200 is supplied with a mains adaptor. An optional battery pack is available to make the ADC-200 more portable.

Specification
Channels  2xBNC + 1 external trigger
Analog Bandwidth 10 MHz
Sampling Rate single) 20 MS/s
Sampling Rate (dual channel) 20 MS/s
Resolution  8 bit
Buffer Size 8 KB
Dynamic range 50 dB
Scope timebases 100 ns/div to 50 s/div
Spectrum ranges 0 to 10 MHz
Trigger Modes Free run, Auto, Repeat & Single
Pre/ post trigger ±100%
Voltage ranges ±50 mV to ±20 V in nine ranges
Overload protection ±100V
Input Impedance 1 MΩ
Coupling AC, DC
Accuracy ±3 %
PC connection Parallel port
Power Supply 500 mA @ 12 V (mains adaptor supplied)
Dimensions 140 x 190 x 45 mm
Supplied software

PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger), Drivers and examples (C, Delphi and Visual Basic, Labview, Agilent VEE6.1 and Excel)
Software is supplied on CD and is compatible with Windows XP (SP2 or later), Vista, Windows 7, 8 and 10 (32- and 64-bit)