150 MHz oscilloskop Probe X1/X10

Pico Technology
TA132
*** Tilbud *** (gælder så længe lager haves)
  • Beskrivelse
  • Mere information

The TA132 is a 150 MHz low-cost, general-purpose passive high-impedance oscilloscope probe designed for use with oscilloscopes. It is calibrated to work effectively with instruments that have an input impedance of 1 MΩ. A two-position slide switch on the probe handle allows the attenuation ratio to be switched between 10:1 and 1:1. The small box adjacent to the BNC plug contains two adjustable resistors that enable high-frequency trimming.

The probe is equipped with a basic accessory pack including a retractable hook tip, compensation adjustment tool, IC insulation cap, insulating cap, a ground spring, BNC adapter and a ground lead.


Specification
 X1 X10
Attenuation 1:1 10:1
Bandwidth DC to 10MHz DC to 150MHz
Rise time: 35ns 2.33ns
Input Resistance 1M Ohm 10M Ohm
Input Capacitance 46pF
plus oscilloscope
Aprrox 11pF
Working Voltage 600V DC incl Peak AC (derating with freq)
Cable Length 1.1M