Lascar EL-USB-TP-LCD Temperature Probe Data Logger

Lascar Electronics
  • Beskrivelse
  • Mere information
  • -40 to +125°C (-40 to +257°F) probe measurement range
  • High contrast LCD with temperature display
  • USB interface for set-up and data download
  • User-programmable alarm thresholds
  • Status indication via red and green LEDs
  • Immediate, delayed and push-to-start logging
  • Supplied with 1.0m type 2 sensor probe
  • Probe length can be easily extended with an extension cable
  • Supplied complete with replaceable lithium battery and Windows control software 

EL-USB-TP-LCD Temperature Data Logger with LCD display
Measures -40 to +125°C (-40 to +257°F) with included Thermistor Probe.

Thermistor Logger with Direct USB Connection and Alarms.
Software and Thermistor Probe included with each logger.

This standalone data logger measures and stores up to 32,510 temperature readings from the supplied thermistor probe which is attached via the socket at the base of the unit. The user can easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running the purpose designed software under Windows XP (SP2 or later), Vista, Windows 7, 8 and 10 (32- and 64-bit). Data can then be graphed, printed and exported to other applications.

The EL-USB-TP-LCD features an LCD and push-button which allows the user to cycle through the most recent, highest and lowest stored temperature readings. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 6 months.

Thermistor Probe
The probe supplied with the EL-USB-TP-LCD uses a precision thermistor to sense the temperature. Alternative lengths and probe options are available.
Alternatively, the probe length may be extended by the use of a suitable extension cable. We recommend twisted pair with high quality 3.5mm jack socket/plugs for best results. 

Windows Control Software
Easy to install and use, the control software runs under Windows XP (SP2 or later), Vista, Windows 7, 8 and 10 (32- and 64-bit). It allows the user to set up and download any EL-USB-TC.

The software allows the following parameters to be configured:

  • Logger Name
  • °C, °F
  • Logging rate (1s, 10s, 30s, 1m, 5m, 30m, 1hr, 6hr, 12hr)
  • High and low alarms
  • Immediate, delayed and push-to-start logging
  • Display off, on for 30 seconds after button press, or permanently on
  • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full) 

    Documents available for download:
     EL-USB-TP-LCD datasheet