TiePie Handyscope 2

HS2
Udgået produkt
  • Beskrivelse
  • Mere information
  • 2 channels
  • 12 bit
  • 200 kHz
  • LPT

Handyscope 2 produceres og sælges ikke længere
Se PicoScope 2203 for erstatning

Handyscope 2, 200KHz Dual Channel Oscilloscope Multi-Instrument

Handyscope 2 is a useful, time-saving addition to your measurement problems. The Handyscope 2 offers 12 bits resolution, 100 mV - 80 V full scale input range and 200 kHz sampling on two fully configurable channels. The maximum record length is 32Ksamples and pre/post samples are free settable between 0 and 32K.

The Handyscope 2 doesn't require an external power supply, therefor the Handyscope 2 easily complies to "Plug in and measure".

The universal software that is delivered with the Handyscope 2 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.

The Handyscope 2 is delivered with 2 1:1 - 1:10 switchable oscillscope probes, Windows and DOS software and user manuals.

Specification
Inputs 2 analog
A/D converter
   resolution
   effective data throughput
   conversion time
1 per channel
12 bit = 0.025%
200,000 samples/sec
5 µsec
Analog input
   sensitivity
   maximum voltage
   impedance
   coupling
   accuracy
   bandwidth
BNC
100 mV .. 80V, full scale, each channel individually
125 V, AC 50 Hz
1 MOhm / 20 pF
AC/DC
0.2% ± 1 LSB
DC to 100 kHz
Trigger system
   sources
   modes
   level adjustment
   hysteresis adjustment
   resolution
   pre trigger
   post trigger
digital, 2 levels
Ch1, Ch2, keyboard
rising slope, falling slope, inside window, outside window
0 - 100% of full scale
0 - 100% of full scale
0.039% (8 bits)
0 - 32768 samples (0 - 100%)
0 - 32768 samples (0 - 100%)

Maximum sample rate

200 kHz on two channels
Memory 32 KWords / channel
Interface LPT1, LPT2 or LPT3
Power from LPT port
Sizes 50 mm x 145 mm x 85 mm
Accessory 2 oscilloscope probes 1:1 - 1:10 switchable