PicoScope 4223 2-kanal auto oscilloskop

Udgået produkt
  • Beskrivelse
  • Mere information
  • 2 channels
  • Up to 80 MS/s real-time sample rate
  • Up to 20 MHz bandwidth
  • 32,000,000 sample memory
  • 100 V  maximum input
  • No power supply required
  • USB 2.0 (USB 1.1 compatible) connection for fast screen updates
  • Protected against overloads and short circuits
  • CAN bus and FlexRay compatible
  • Use with any vehicle
  • Easy to use
  • Includes PicoScope Automotive software
  • Free software updates
  • 24 month warranty
  • Free technical support  

PicoScope 4223 produceres og sælges ikke længere
PicoScope 4225 for erstatning.

PicoScope 4223 2-kanal automotiv oscilloskop ("Labscope")

PicoScope 4000 oscilloskoper er designet til at spare dig tid og penge ved at gøre det lettere og hurtigere at diagnosticere nutidens moderne biler.

PicoScope 4000-serien er den mest avancerede program af PicoScope lab skoper der er tilgængelig og kan købes separat eller som del af et auto-kit.

Faster sampling
The PicoScope 4000 Series can capture signals four times faster than any other PicoScope automotive scope – this makes it compatible with the new FlexRay standard and ensures your PicoScope oscilloscope will continue to be useful for a long time to come.

More memory
As well as capturing faster signals, the PicoScope 4000 Series also outperforms other scopes thanks to the 32 MB of ‘always on’ memory. With 64 times the memory of the previous generation of scopes, the PicoScope 4000 Series ensures that you can effortlessly capture every detail of the signal. Never again will you miss those hard-to-find intermittent faults.

Higher input range
The high ±100 V input range of the PicoScope 4000 Series eliminates the need for external attenuators for most vehicle tests.

Sorry – we couldn’t make it any easier to use
Thanks to the familiar graphical user interface, help files and reference library, using your PicoScope 4000 Series diagnostic oscilloscope is as easy as ever. If you’re an existing PicoScope user you can just connect your scope and benefit immediately from the power and performance of your new PicoScope 4000 Series. If you’ve never used a PicoScope oscilloscope before you can get started without needing to spend hours reading manuals.

The labscope for the new generation of vehicles
The fast sampling speeds, large memory and bandwidth of the PicoScope 4000 Series means that not only is it suitable for use on all current vehicles, but it will continue to be of use in diagnosing faults with the complex electrical and electronic systems that will be found on new and future generations of vehicles.

Documents available for download:
 Picotech "Automotive Diagnostics Kit Catalog"


Bandwidth 20 MHz (10 MHz on ±50 mV range)
Channels 2
Vertical resolution 12 bits
Enhanced vertical resolution 16 bits
Accuracy ±1%
Sensitivity 10 mV/div to 20 V/div
Input ranges (full scale) ±50 mV to ±100 V in 11 ranges
Input characteristics 1 MΩ in parallel with 22 pF
Input type Single-ended, BNC connector
Input coupling Software selectable AC/DC
Overload protection ±200 V on single input
Maximum sampling rate (single shot) 80 MS/s
Buffer memory 32 M samples shared between active channels
Waveform buffer Up to 1000 waveforms
Timebase ranges 100 ns/div to 200 s/div

Source Any input channel
Basic triggers Auto, repeat, single, none
Advanced triggers Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, windowed
Maximum pre trigger delay 10 x “per division” timebase setting
Maximum post trigger delay 50 s

Spectrum Analyser
Bandwidth 20 MHz
Frequency range DC to 20 MHz
Display modes Magnitude, peak hold, average

PC Requirements


Processor: Pentium II processor, or equivalent
Memory: 64 MB (XP) / 512 MB minimum
Operating system: Windows XP (SP2 or later), Vista, Windows 7, 8 and 10 (32- and 64-bit)
Ports: USB 1.1 compliant port


Processor: 2 GHz Pentium IV processor, or equivalent
Memory: 256 MB (XP) / 1 GB
Operating system: Windows XP (SP2 or later), Vista, Windows 7, 8 and 10 (32- and 64-bit)
Ports: USB 2.0 compliant port

Operating environment
Temperature range

0 °C to 45 °C (15 °C to 40 °C for quoted accuracy)
Storage environment
Temperature range

-20 to +60°C
5 to 95% RH, non-condensing

Physical Dimensions
Dimensions 200 x 140 x 35 mm (approx 7.9 x 5.5 x 1.4 in)
Weight <500 g (approx 1.1 lb)


Additional hardware (supplied)

USB 2.0 cable, user manuals, software CD-ROM
PC interface USB 2.0 (USB 1.1 compatible) - cable supplied
Power requirements From USB port
Compliance FCC (EMC), CE (EMC and LVD), RoHS compliant
Warranty 2 years