500 MHz high-impedance passive probe 10:1 with BNC

Pico Technology
TA133
500 MHz high-impedance passive probe 10:1 with BNC
  • Beskrivelse
  • Mere information
  • Specifikationer

The TA133 is a high-impedance passive probe with 500 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA133 has been compensated to ensure optimal performance with the PicoScope 6404 oscilloscopes.

 

The compact design of this high-performance probe means there is only 2.5 mm housing diameter at the probe tip compared to the conventional 5 mm housing, making it easier to see the device under test and making it ideal for measurements of SMT components.

Each TA133 probe is supplied with the following accessories and spares:

  • 1 x Coding rings (set) 3x4 colours
  • 1 x Ground blade 2.5
  • 1 x Ground lead 15 cm
  • 1 x Ground spring 2.5
  • 1 x IC-Cap 2.5 0.5 mm pitch; green
  • 1 x IC-Cap 2.5 0.65 mm pitch; blue
  • 1 x IC Cap 2.5 0.8 mm pitch; grey
  • 1 x IC Cap 2.5 1.0 mm pitch; brown
  • 1 x IC Cap 2.5 1.27 mm pitch; black
  • 1 x Insulating cap
  • 2 x Self-adhesive Cu pad 2 x 2 cm
  • 1 x Solid tip CuBe 0.5 mm
  • 1 x Spring tip gold plated 0.5 mm
  • 1 x Sprung hook
  • 1 x Trim tool
  • 1 x PCB adaptor kit
TA133 probe characteristics
Attenuation 10:1
Resistance at probe tip 10 MΩ
Capacitance at probe tip 9.5 pF
Scope input impedance 1 MΩ
Compatibility PicoScope 6404A/B/C/D
Bandwidth (3 dB) DC to 500 MHz
Maximum working voltage 300 V RMS CAT II
Risetime (10% to 90%) 700 ps
Compensation range 10 to 25 pF
Safety standard IEC/EN 61010-031
Cable length 1.3 m (approx. 4 ft 3 in)