Strømtænger

Clamp-on strømprober eller "strømtænger" gør det muligt for brugeren at måle strømme uden at bryde det elektriske kredsløb. Strømtænger er designet med kæber, der kan åbnes, placeret omkring lederen og når den lukkes dannelse en magnetisk sløjfe omkring lederen.

Strømtænger tilbyde en sikker, omkostningseffektiv, enkel og præcis måde at måde de aktuelle strømme i et kredsløb.

MicroTecs vifte af
strømtænger kan bruges med Picotech oscilloskoper og dataloggere samt alle kendte mærker af oscilloskop og multimetre.

!

Strømtang (60A AC/DC)

Pico Technology
TA018

The TA018 current probe can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current.

The TA018 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

Strømtang (600A AC/DC)

Pico Technology
TA019


The TA019 current clamp can measure AC and DC currents up to 600

The TA019 current clamp is ideal for use with a PicoScope oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.

Strømtang (2000A/200A (AC/DC)

Pico Technology
TA167

This current clamp is suitable for measuring currents of upto 2000 A DC or 1500 A AC and is terminated in a BNC connector.

The 2000A/200A heavy duty current clamp allows you to measure up to 2000A without cutting, disconnecting or stripping the wire. It is ideal for measuring the high currents drawn by the starter motor of commercial vehicles and large engine passenger cars.

This clamp can replace both the existing PP266 (600A), and PP253 (2000A) clamps with improved sensitivity, lower noise and faster response. The TA167 features a 200A mode for better performance at lower currents and has an improved jaw size. It also features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain / shutdown current testing).

Using advanced Hall Effect sensors for improved sensitivity and high external field rejection, the TA167 delivers a breakthrough in range and accuracy to meet the challenges of modern vehicles and particularly diesel engines.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup.