ADC-212/3 produceres og sælges ikke længere
Se PicoScope 4224 for erstatning
PC-baseret oscilloskop, spektrumanalysator og meter med høj opløsning
The ADC-212/3 balances resolution, sampling rate, and cost to make an ideal general purpose oscilloscope. The 3 MS/s sampling speed and 32 KB waveform buffer makes the ADC-212/3 an ideal solution for high speed data acquisition.
The 12-bit resolution in the Y-axis gives the ADC-212/3 the ability to detect changes as small as 0.024 per cent. Conventional 8-bit oscilloscopes only have the ability to detect changes greater than 0.4%, but precision analogue and audio engineers require the ability to detect signal changes of less than 0.1 per cent.
Most digital storage oscilloscopes have front end amplifiers designed for high bandwidth, these products are no exception. Unlike most oscilloscopes however, the front end amplifiers also exhibit very low levels of noise and distortion. This low noise and distortion, combined with the 12 bit resolution gives an 80 dB dynamic range for the spectrum analyser.
The ADC-212/3 PC based oscilloscope / spectrum analyser is our recommended product for automotive diagnostics and fault finding. It is ideal for viewing and testing most automotive signals and sensors. Many examples are included in our library of automotive waveforms.
| Specification |
| Channels |
2xBNC + 1 external trigger |
| Analog Bandwidth |
1.5 MHz |
| Sampling Rate |
3 MS/s |
| Sampling Rate (dual channel) |
3 MS/s |
| Resolution |
12 bit |
| Buffer Size |
32 KB |
| Dynamic range |
80 dB |
| Scope timebases |
2µs/div to 50 s/div |
| Spectrum ranges |
0 to 1.5 MHz |
| Trigger Modes |
Free run, Auto, Repeat & Single |
| Pre/ post trigger |
±100% |
| Voltage ranges |
±10 mV to ±20 V in 11 ranges |
| Overload protection |
±100V |
| Input Impedance |
1 MΩ |
| Coupling |
AC, DC |
| Accuracy |
±1 % |
| PC connection |
Parallel port |
| Power Supply |
500 mA @ 12 V (mains adaptor supplied) |
| Dimensions |
140 x 190 x 45 mm |
| Supplied software |
PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger), Drivers and examples (C, Delphi and Visual Basic, Labview, Agilent VEE6.1 and Excel)
Software is supplied on CD and is compatible with Windows XP (SP2 or later), Vista and Windows 7 (32- and 64-bit) |
